Table of Contents
Advertisement
In case of S2 + T(T2)
[ TUNER 1 ]
1. LNB IN (Caution : LNB1 in on the left bottom)
Satellite IF signal input socket of the first tuner (TUNER 1).
Connects a satellite antenna LNB cable.
2. LNB OUT
Satellite IF signal output socket tof the first tuner (TUNER
1). Connects to another STB for loop-through.
[ TUNER 2 ]
1. ANT IN
Terrestrial signal input socket of the second tuner (TUNER
2). Connects to a UHF aerial.
2. LOOP OUT
Terrestrial signal output socket of the second tuner
(TUNER 2). Can be used to connect to another STB.
In case of S2 + C
[ TUNER 1 ]
1. LNB IN (Caution : Socket on the left bottom)
Satellite IF signal input socket of the first tuner (TUNER 1).
Connects a satellite antenna LNB cable.
2. LNB OUT
Satellite IF signal output socket tof the first tuner (TUNER
1). Connects to another STB for loop-through.
[ TUNER 2 ]
3. CABLE IN
Cable signal input socket of the second tuner (TUNER 2).
Connects to a cable TV network.
4. CABLE OUT
Cable signal output socket of the second tuner (TUNER 2).
Connects to another STB or Cablemodem.
In case of T(T2) + C
[ TUNER 1 ]
1. ANT IN
Terrestrial signal input socket of the first tuner (TUNER 1).
Connects to a UHF aerial.
2. LOOP OUT
Terrestrial signal output socket of the first tuner (TUNER 1).
Can be used to connect to another STB
[ TUNER 2 ]
3. CABLE IN
Cable signal input socket of the second tuner (TUNER 2).
Connects to a cable TV network.
4. CABLE OUT
Cable signal output socket of the second tuner (TUNER 2).
Connects to another STB or Cablemodem.
12
Advertisement
Table of Contents
