Table of Contents
Advertisement
How to Care
Make sure that the AC adaptor is not connected when starting maintenance.
■ Main unit (Excluding the power supply/communication terminal)
p p When the main unit becomes dirty, clean it with a dry soft cloth.
When the dirt is hard to remove, wipe gently with a well squeezed wet cloth first and
then wipe with a dry soft cloth.
p p Do not use the following to clean the main unit: thinner, benzene, wax, petroleum, soap,
polishing powder, hot water, chemical cleaning cloth.
■ Power supply/communication terminal
p p When the power supply/communication terminal becomes dusty or stained with grease,
etc., the handheld computer may sometimes not be charged. When it becomes dirty,
clean it using a dry soft cloth according to the dirtiness. (Recommended to clean once a
month.)
Be also careful not to bend the terminal.
Troubleshooting
Symptom
Cannot establish
communication.
Cannot charge the
handheld computer.
If a problem cannot be resolved even after checking and trying the solution given above,
contact a service personnel.
Caution:
p p Never attempt to disassemble this product since it may damage it.
Check items and solutions
p p The handheld computer is not placed correctly.
→Place the handheld computer correctly.
p p The USB cable is disconnected.
→Check the cable connection.
p p The handheld computer is not placed correctly.
→Place the handheld computer correctly.
p p The AC adaptor is disconnected.
→Check the cable connection.
p p The power supply/communication terminal is dirty.
→Clean the power supply/communication terminal.
9
Advertisement
Table of Contents
