Maintenance Reset; Fuel Gauge Self-Diagnostic; Gauge Functioning (8S Timer) - PEUGEOT JETForce Technical Training Manual

Maintenance reset

Every 5000 km a « spanner » symbol appears informing the rider that his machine is due for service
After servicing the machine, erase the symbol as follows:
- Ignition off
- Press button and hold down
-Turn on the ignition (only the spanner appears and flashes)
- Press for >5s to erase the symbol

Fuel gauge self-diagnostic

If the fuel system is cut off from the fuel gauge, when the ignition is turned on, the 8 LEDs light one after
the other

Gauge functioning (8s timer)

8 LEDs represent a full tank (10 ohms)
2 LEDs flash (75 ohms)
1 LED flashes (98 ohms)
8 LEDs flash (R> 87 ohms) means an empty tank
TRAINING MANUAL: JET FORCE
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
INSTRUMENT CLUSTER
Page : 39/43