Advertisement
1-1-2. Remote Functions (Cover Open)
ON/OFF Button
• Push this button to start operation.
(A receiving beep is heard)
• Push the button to stop operation.
(A receiving beep is heard)
Infrared signal transmitter
Transmits the signal to the indoor unit
Cover closed functions
• Push this button to show functions
as with the cover closed.
Function lock button (LOCK)
• Push this button to lock settings.
• Push this button again to cancel
lock function.
Reserve button (RSV)
• Push this button to set timer
(A receiving beep is heard).
.
-4-
Mode select button (MODE)
Push button to select modes. Each time
you push the button, a mode is selected
in a sequence that goes from AUTO,
COOL, DRY, HEAT, FAN ONLY, and
back to AUTO. (A receiving beep is
heard).
Temperature button (TEMP)
The set temperature is
increased to a max 30ºC.
The set temperature is
decreased to a min of 17ºC.
Fan speed button (FAN)
• Push this button to select fan speed.
• When you select AUTO, the fan
speed is automatically adjusted
according to the room temperature.
You can also manually select the
desired fan speed from the three
settings. Low, Med, High. (A receiving
beep is heard).
Auto louver button (AUTO)
• Push this button to operate the
louver.
(A receiving beep is heard).
• Push this button again to stop louver
operation.
(A receiving beep is heard).
Set louver button (SET)
• This button has no function on RAV
units.
Off timer button (OFF)
• Push this button to set the OFF
timer.
On timer button (ON)
• Push this button to set the ON timer.
Time adjust button
• Rotate this to increase/decrease
time settings.
Cancel button (CNL)
• Push this button to cancel timer
operation.
(A receiving beep is heard).
Advertisement
