How To Use Cd / Mp3 Player - Inter-m ACR-120M Operation Manual

How to Use CD / MP3 Player

How to Use CD / MP3 Player
Power ON/OFF
- When there does not exist a disc upon power-on:
1. If power is applied to CDP,
2. Push the CD softly until the tray pulls on the CD.
3. While the unit reads CD,
4. For MP3 CD,
5. fter the unit searches the music information on a CD (for about 10 seconds),
displayed, keeping a standby status.
6. Press the switch to start operation. Then playback is started from the first song on a CD.
- When there exists a disc upon power-on:
1. While the unit reads CD,
2. For MP3 CD,
3. fter the unit searches the music information on a CD,
status.
4. Press the switch to start operation. Then playback is started from the first song on a CD.
- LCD DISPL Y OFF
1. If press STOP
STOP
2. Please press any key in case of turns on LCD DISPL Y power again or push the CD to DISC TR Y.
Functions
- PL Y Function
1. Insert a CD, and press
2. When MP3 CD is played,
- P USE Function
1. If you stop playing at the current position temporarily, press
2. While this pause function is active,
3. If you press
PLAY/PAUSE
the current position.
4. While the pause function is active, you can move between directories or tracks. If, however, you make
such movement, the pause function is released, and the unit starts playing automatically.
- SC N Function
1. You can use this function to search a desired song by hearing the first part of each track.
2. If you press
SCAN
track for 10 seconds.
3. If you press
SCAN
P USE
PLAY/PAUSE
a CD.
4. While the track is performing a search function,
5. If you find a desired track, press
6. In case of MP3, if you long-press
and the unit plays the beginning part of each file in the directory for 10 seconds.
message is displayed, keeping a standby status.
NO DISC
message is displayed.
S -- CDP-- -- --
message is displayed.
READING CD ROM
message is displayed.
S -- CDP-- -- --
message is displayed.
READING CD ROM
switch in case of NO DISC
NO DISC
switch after CD information is displayed.
PLAY/PAUSE
is displayed on the left top of LCD display.
MP3
S -- PAUSE
switch once more, the pause function is released and the unit starts playing from
switch in the course of playing, the unit plays the beginning part of each subsequent
switch in a stop status,
switch, the unit plays the beginning part of each track for 10 seconds from the first track of
switch once more to stop searching and start playing.
SCAN
switch for more than 1 second,
SCAN
message is displayed, keeping a standby
CD STOP
was registered in LCD DISPL Y window, LED power turns off.
PLAY/PAUSE
message is displayed.
message is displayed, and then if you press
INTRO
message is displayed.
D -- INT NO.
COMP CT DISC RECEIVER
message is
CD STOP
switch.
PL Y/
message is displayed,
D -- INT NO.
CR-120M
9