Child Lock; Off Timer - JVC AV-21QS27 Instructions Manual

Customized setting (continued)
ON TIMER
You can set the TV to turn on automatically from standby mode at a set
channel and time.
1
MENU FEATURES menu
2
Choose the PR (channel) that you want to watch when the TV turns on.
External input, AV position and any un-preset channel cannot be
chosen for PR.
3
Set the ON TIMER to your desired period of time.
When the ON TIMER is set to other than 00:00, the ON TIMER is
activated. You can set the period of time to a maximum of 12 hours in
15-minute intervals.
4
To off the ON TIMER, set ON TIMER to OFF.
Note: If TV is not in standby mode when ON TIMER is reach the setting
time, this case is not available.

OFF TIMER

You can set the TV to turn off automatically to standby mode after a set
time.
1
MENU FEATURES menu
2
You can set the period of time to a maximum of 120 minutes in 10
minutes intervals.
3
When the remaining elapse time is one minute, "GOOD NIGHT!"
appears on the screen.
4
You can display the OFF TIMER screen again to confirm or change the
remaining time.
5
To off the OFF TIMER, select OFF or turn off the TVʼs main power.
14
ON TIMER
�� �����
�� ��
�� ����� �����
� � � � ������
������� � ����
���� � ����
OFF TIMER
OFF TIMER 10
BEEP
You can use the BEEP function to alert you during AUTO SIGNAL
DETECT, Al ECO SENSOR Detect, Stereo Detect, ON TIMER/OFF
TIMER operations and when some buttons on the remote control are
pressed.
MENU FEATURES menu

CHILD LOCK

You can disable the front control buttons of the TV.
MENU FEATURES menu
VIDEO-2 SETTING
You can set the VIDEO-2 SETTING according to the video signal output
from external devices connected to the VIDEO-2 terminal.
MENU FEATURES menu
VIDEO If a normal video signal (composite video signal) is input.
COMPONENT If a component video signal (Y/C
You must choose a setting according to the signal that you input to
VIDEO-2. (If you input the VIDEO Signal or VCR Signal to VIDEO-2, you
must set VIDEO-2 SETTING to VIDEO.)
For connection, \ page 4.
BEEP (Choose ON or OFF)
CHILD LOCK (Choose ON or OFF)
(Factory setting is
VIDEO-2 SETTING
COMPONENT)
/C ) is input.
B R