Sony RDR-VX555 Operating Instructions Manual page 25

11
Select the seUing that matches your TV
type.
Ill!DI
Easy Setup 10:10 AM
14
Press ENTER.
The setup display for selecting the type of
DTS signal appears.
15
Select whether or not you want to send a
DTS signal to your amplifier (receiver),
and press ENTER.
If
your AV amplifier (receiver) has a DTS
decoder, select "On." Otherwise, select "Off."
16
Press ENTER when "Finish" appears.
Easy Setup is finished. All connections and
setup operations are complete.
If
you use the cable box/satellite receiver
control, check that the control works correctly
(page 26).
Select your TV screAn type.
1,(
16: 9
4 : 3 Letter Box
4: 3 Pan Scan
"16:9": For wide-screen TVs or standard TVs
with a wide screen mode.
"4:3 Letter Box": For standard TVs.
Displays "wide screen" pictures with bands
on the upper and lower sections of the screen.
"4:3 Pan Scan": For standard TVs.
Automatically displays "wide screen"
pictures on the entire screen and cuts off the
sections that do not fit.
For details, see "Video Settings (Video)" on
page 96.
12
Press ENTER.
The setup display for selecting the type of
Dolby Digital signal appears.
_ EasySetup
DTS
On
Ill!DI
Easy Setup
10:10 AM
10:10 AM
Ill!DI
Easy Setup
Dolby DIgital
Iv'D.PCM
Dolby Digilal
10:10AM
Easy Setup is finished.
13
Select the type of Dolby Digital signal you
want to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
Digital decoder, select "Dolby Digital."
Otherwise, select "D-PCM."
To return to the previous display
Press d"-. RETURN.
.~.
Hint
If you want to run Easy Setup again, select "Easy Setup"
in the "Setup" display (page 104).
To record TV programs using the timer, you must set the
clock accurately.
"continued
25