JVC AV-21M335, AV-21M315, AV-21V315, AV-25M335, AV-25M315, AV-25V315 Instructions Manual page 10

Basic setting for picture (continued)
PICTURE SETTING
You can adjust the desired picture setting when selecting USER
in PICTURE MODE.
1
Select the USER in PICTURE MODE under PICTURE menu.
❇
PICTURE menu
MENU
USER
2
Select the PICTURE SETTING in PICTURE menu, then adjust
the setting.
❇
PICTURE menu
MENU
2 : Lower contrast
CONTRAST
2 : Darker
BRIGHT
2 : Softer
SHARP
2 : Lighter
COLOUR
2 : Reddish
TINT*
When you select to VIDEO-2 Mode. You cannot adjust SHARP
and TINT.
* TINT can only be adjusted in NTSC system.
PICTURE BOOSTER
You can improve picture clarity when the picture is unclear due to
the low signal reception.
Press the PICTURE BOOSTER button to select the desired
mode.
HIGH Perform at maximum level.
LOW Perform at minimum level.
OFF Cancel the function
To operate this function with a menu:
❇
PICTURE menu
MENU
10
PICTURE MODE
PICTURE SETTING
3 : Higher contrast
3 : Brighter
3 : Higher
3 : Deeper
3 : Greenish
PICTURE BOOSTER
WHITE BALANCE
You can change the white balance of the picture to better match
the type of video being viewed.
Select the WHITE BALANCE in the PICTURE menu, then choose
the desired setting.
❇
PICTURE menu
MENU
NORMAL Normal white balance.
COOL Bluish white.
WARM Reddish white.
When you select to VIDEO-2. You cannot adjust WHITE BALANCE.
You can adjust it in DVD Menu.
❇ About the basic operations of the menu, please see the "How
to operate menus and menus locations" on page 5.
WHITE BALANCE