Network Easy Settings - Panasonic DIGA DMR-XW380 Operating Instructions Manual

Network Easy Settings

After completing "Easy setting", you can continue with
"Network Easy Settings".
Follow the on-screen instructions and make
the following settings.
≥Network connection test
≥Home Network (DLNA) function setting
≥Internet connection test
Network Easy Settings
LAN setup and testing of home network and
internet connections are required for internet
functions. Broadband Internet connection is
necessary for network features.
Please confirm that a LAN cable is connected.
Please refer to the operating instructions.
Press OK to start Network Easy Settings.
OK
RETURN
When TV picture appears, Setup is complete.
∫ When you experience problems with
settings
≥Network Easy Settings ( Connection Test )
Display
1. LAN cable
"Fail"
connection:
2. IP address
"Fail"
setting:
3. Connection to
"Fail"
gateway:
1. LAN cable
"Pass"
connection:
2. IP address "Fail" or "Home
setting: network
available"
3. Connection to
"Fail"
gateway:
1. LAN cable
"Pass"
connection:
2. IP address
"Pass"
setting:
3. Connection to
"Fail"
gateway:
≥Network Easy Settings ( Internet Connection Test )
Cannot find the
server. (B019)
No connection could
be made to the
server. (B020)
To stop partway
Press [RETURN
To restart Network Easy Settings
1 While stopped
Press [FUNCTION MENU].
2 Select "Setup" in "Others", then press [OK].
3 Select "Network Easy Settings" in "Network", then press
[OK].
To redo settings individually
1 While stopped
Check the
Press [FUNCTION MENU].
following
2 Select "Setup" in "Others", then press [OK].
≥Connection of
3 Select "Network Settings" in "Network", then press [OK].
the LAN cables
4 Select "IP Address / DNS Settings" (
( 13)
Server Settings" (
Check security before using Home Network (DLNA)
function
≥Connection and
If you set "Home Network (DLNA) function" to "On", all
settings of the
connected devices on the same network can access this
hub and router
unit. Ensure that the router for your home network has
≥Settings of "IP
adequate security system to prevent unauthorized access.
Address / DNS
≥Refer to the operating instructions of the hub or router.
Settings" ( 81)
≥ Home Network (DLNA) function setting can be set only when you
selected "Off" for "Power Save in Standby" in "Easy setting". (
step 3)
≥ Even if you set "Home Network (DLNA) function" to "Off", it is possible to
set to "On" later. (
Display Check the following
≥Network connections and
settings
≥Settings of "IP Address / DNS
Settings" (
≥The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥Settings of "Proxy Server
Settings" (
].
81), then press [OK].
67)
81)
81)
81) or "Proxy
18,
19
VQT2J63