Checking The Network Status - Mazi INVR-0xA User Manual

User Manual of INVR-0xA / INVR-0xPOE series NVR
Click Refresh button if the connected local backup device cannot be displayed. When it fails to detect
the backup device, please check whether it is compatible with the NVR. You can format the backup
device if the format is incorrect.
4. Click Export to start exporting.
5. After the exporting is complete, click OK to finish the packet export.
Up to 1M data can be exported each time.

9.4.3 Checking the Network Status

Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
1. Enter the Network Traffic interface.
Menu >Maintenance>Net Detect
2. Click the Network Detection tab to enter the Network Detection interface.
3. Click Status button on the right bottom of the page.
Figure 9. 30 Export Network Packet
Figure 9. 31 Packet Export Attention
118