Lcd Display And Operating Instructions - Heaven Fresh AquaCharger AK-900 Instruction Manual

7. LCD Display and Operating Instructions

1. LCD indicators for each functions.
Acidic
During ionization process, when
switched to acidic water output, it
makes "beebee" sound and also
"Acidic" light starts blinking. Until
water reaches the acidic level, "Acidic"
light stops blinking, but the beep
sound will continue.
ORP/PH Levels
Pressing FUN button can change

ORP/PH screen displays which indicate
the ORP/PH value of each setup level.
In ionization process, it indicates the
ORP/PH level of the water output.
Caution:
To avoid leakage, Input water pressure should NOT exceed 4 L/Min (litres per minute). Lower
the water pressure on your tap by not opening it at full force (2.5 - 3.0 L/Min is ideal setting).
Actual reading is displayed on the unit's LCD Screen at the bottom left hand side under rotating
wheel.
Heaven Fresh
When water input reaches 1.2L/Min, the

ionization process begins, and the "Working"
starts blinking, When water reaches the
desirable PH level, "Working" stops blinking.
When "Working" is blinking, the water has

not been ionized to the desirable level. It is not
ready to use.
(Acidic)
(working)
Filter Life
Normal Filter life is 12000L. When the

indicator shows 12000L, it is time to
replace the filter.
Filter life varies according to local

water quality. The filter has to be
replaced at least once a year.
12
Working
Water Input Volume
Adjust water input volume at 2.5-
3.0 liters per minute for the best
quality.
AK-900