Pppoe - Watchguard DVR8ENT3 Product Manual

3) DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet
Service Provider).
4) PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the
TCP port used by HTTP is 80. However in some cases, it is better to change this
port number for added flexibility or security.

5.8.2 PPPOE

Note: When PPPOE configuration is completed, please move to "DDNS" to
configure the DDNS service.
CANERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
NOTIFY
EXIT
1) NETWORK TYPE
Select the network type as PPPOE and set all the information needed in the DVR.
2) DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet
Service Provider).
3) PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the
TCP port used by HTTP is 80. However in some cases, it is better to change this
port number for added flexibility or security.
4) USER NAME / PASSWORD
Set "username" and "password" subscribed from your ISP supplier.
ADVANCED CONFIG
NETWORK SNTP FTP E-MAIL DDNS
NETWORK TYPE
IP
GATEWAY
NETMASK
PRIMARY DNS
SECONDARY DNS
PORT
USER NAME
PASSWORD
34
APPENDIX 1 SPECIFICATIONS
PPPOE
192.168.001.010
192.168.001.254
255.255.255.000
168.095.001.001
139.175.055.244
0080
OFFICE
●●●●●●