JVC Everio GS-TD1BEK Detailed User Manual page 34

Recording
Operation Buttons for Still Image Recording
Operation Button
Parallax
1
Adjustment
2 / 3 T/W Zoom
Recording/
4
Playback Mode
Snapshot
5
Q
LCD Monitor 3D/2D
6
Display
MENU
7
Display Button n
8
34
[6630]
Description
Adjusts the 3D effect when 3D images
are displayed on the LCD monitor.
"Adjusting Parallax During Recording"
(A p. 35)
Allows the same functions as the zoom
lever to be performed.
Camera shake that often occurs when
using the zoom lever can be minimized.
"Zooming" (A p. 32)
Switches between recording and
playback modes.
Functions as the SNAPSHOT button.
However, focus cannot be set by
pressing halfway.
Switches the display on the LCD monitor
between 3D and 2D. The image will be
recorded in 3D even if the display on the
LCD monitor is set to 2D.
Displays the various menus of still image
recording.
"Operating the Menu" (A p. 102)
Some displays disappear after
approximately 3 seconds.
Use the n button to change the displays
as shown below.
Tap n button
0
Displays appear for approximately 3
seconds with every tap.
Tap and hold n button
0
Displays are fixed such that they do not
disappear. After setting, the display
button changes from n to m.
Tap m to release the displays.
Useful Settings for Recording
When "QUICK RESTART" is set to "ON", this unit turns on immediately if
0
you open the LCD monitor within 5 minutes after the power is turned off
by closing the monitor.
"QUICK RESTART" (A p. 127)
When "AUTO POWER OFF" is set to "ON", this unit turns itself off
0
automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
"AUTO POWER OFF" (A p. 127)
When "TOUCH PRIORITY AE/AF" is set to "FACE TRACKING", this unit
0
detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.
"Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)" (A p. 45)
The image resolution can be changed.
0
"IMAGE SIZE" (A p. 118)
Caution :
Do not expose the lens to direct sunlight.
0
Do not use this unit in the rain, snow, or places with high humidity like the
0
bathroom.
Do not use this unit in places subject to excessive humidity or dust, as well
0
as places exposed to steam or smoke directly.
Do not remove the battery pack, AC adapter, or SD card when the access
0
lamp is lighted. The recorded data may become unreadable.
Memo :
Before recording an important scene, it is recommended to conduct a trial
0
recording.
The digital image stabilizer does not work when recording still images.
0