Taking Still Images In Intelligent Auto Mode - JVC Everio GS-TD1BEK Detailed User Manual

Taking Still Images in Intelligent Auto Mode

You can record without worrying about the setting details by using the
Intelligent Auto mode.
1
Open the lens cover.
2
Open the LCD monitor and select the still image mode.
The still image icon B appears.
0
3
Check if the recording mode is P Intelligent Auto.
If the mode is H Manual, press the H/T button to switch to P
0
Intelligent Auto.
The mode changes between Intelligent Auto and Manual with every
press.
4
Set the focus on the subject.
Press halfway
When focused, the focus icon lights up in green.
0
5
Take a still image.
Press fully
PHOTO lights up when a still image is being captured.
0
Indications During Still Image Recording
1/125
Display Icon
1 Image Size Displays the icon of the image size.
The size of still images can be changed.
0
"IMAGE SIZE" (A p. 118)
2 Shutter Speed Displays the shutter speed.
3 Focus Lights up in green when focused.
4 Recording in Appears when a still image is being captured.
Progress
5 Remaining Number Displays the remaining number of shots for still
of Shots image recording.
6 Recording Mode Press the i.AUTO button to switch the
recording mode between P (Intelligent Auto)
and H (Manual).
Some displays disappear after approximately
7 Display Button n
3 seconds.
Use the n button to change the displays as
shown below.
Tap n button
0
Displays appear for approximately 3
seconds with every tap.
Tap and hold n button
0
Displays are fixed such that they do not
disappear. After setting, the display button
changes from n to m.
Tap m to release the displays.
8 Battery Indicator Displays the approximate remaining battery
power.
Details of the battery power can be displayed
by pressing the INFO button.
"Remaining Recording Time/Battery Power"
(A p. 50)
9 Recording Media Displays the icon of the media where still
images are recorded to.
The recording media can be changed.
"REC MEDIA FOR IMAGE" (A p. 126)
0 3D/2D Mode Displays the current recording mode of 3D or
2D. "3D" is displayed during 3D recording,
while "2D" is displayed during 2D recording.
Recording
[6630]
Description
33