Table of Contents
Advertisement
disassembly of the coffee grinder motor
1. U ndo the four fixing screws of the motor flange.
2. R emove the sensor support from the flange seat
with the aid of a small screwdriver (as shown in
the figure).
3. R emove the rubber plug from the motor flange.
Service Manual
P0055 coffee Machine - 2006
4. R emove the sensor from the flange seat by pressing
on the anchoring tab.
5. disconnect the motor power cables.
6. If the gear is damaged, remove it using a 10 mm
wrench and a 7 mm wrench to unscrew the
locknut.
Edition
2006.08.28
E
Language
english
n
Advertisement
Table of Contents
