Shooting With Color Swap - Canon PowerShot D30 User Manual

Shooting with Color Swap

You can replace one image color with another before shooting. Note that
only one color can be replaced.
1
Choose [Y].
z z
Follow step 1 in "Specific Scenes"
(=
2
Access the setting screen.
z z
Press the <p> button.
z z
The original image and the Color Swap
image are displayed one after another.
z z
By default, green will be replaced with
gray.
3
Specify the color to replace.
z z
Position the center frame over the color
to replace, and then press the <q>
button.
z z The specified color is recorded.
4
Specify the new color.
z z
Position the center frame over the new
color, and then press the <r> button.
z z The specified color is recorded.
Still Images Movies
51) and choose [Y].
5
Specify the range of colors to
replace.
z z
Press the <o><p> buttons to adjust the
range.
z z
To replace only your specified color,
choose a large negative value. To replace
colors similar to your specified color as
well, choose a large positive value.
z z
Press the <m> button to return to the
shooting screen.
6
Shoot.
•
Using the flash in this mode may cause unexpected results.
•
In some shooting scenes, images may look grainy and colors may
not look as expected.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Using GPS Using GPS
Functions Functions
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
58