Restoring Defaults - Canon PowerShot D30 User Manual

Metric / Non-Metric Display
Change the unit of measurement shown in GPS elevation information
(= 30), the zoom bar (= 35), the MF indicator
elsewhere from m/cm to ft/in as needed.
z z
Choose [Units], and then choose [ft/in].
Display Language
Change the display language as needed.
z z
Choose [Language
the <m> button.
z z
Press the <o><p><q><r> buttons to
choose a language, and then press the
<m> button.
•
You can also access the [Language] screen in Playback mode by pressing and
holding the <m> button and immediately pressing the <n> button.
(= 72), and
], and then press

Restoring Defaults

If you accidentally change a setting, you can restore default camera
settings.
1
Access the [Reset All] screen.
z z
Choose [Reset All], and then press the
<m> button.
2
Restore default settings.
z z
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
z z
Default settings are now restored.
•
The following functions are not restored to default settings.
- [3] tab settings for the image assigned to [Start-up Image]
[Date/Time] (= 109), [Time Zone]
[Video System] (= 117).
- Custom white balance data you have recorded
- Colors chosen in Color Accent
- Shooting mode (= 51)
(= 106),
(= 109), [Language ] (= 110), and
(= 70)
(= 57) or Color Swap (= 58)
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Using GPS Using GPS
Functions Functions
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
110