General Items; Purity; On/Off Timer - JVC I' Art AV-27F702 User Manual

Purity

This helps clean up the picture so that it may not contain any "snow".
Press the M
To PURITY
To enter
To adjust purity

On/Off Timer

The On/Off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you're not
home.
Press the M
To ON/OFFTIMER
To operate (begins with ON TIME)
To set the hour (AM/PM) you want the TV to turn on
To move to minutes
To set the minutes
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIMEthe same way as ON TIME
To accept OFFTIME and move to CHANNEL
To select channel
To move to MODE
Choose ONCE or EVERYDAY
To ON/OFFTIMER
Choose YES to accept the timer setting, choose NOif you don't wish to accept
To FINISH
To save settings
On/Off Timer Note for PIP (AV-36F802, AV-32F802 & AV-27F802) only.
If the television is on when a timed event is about to start a Timer Preview window will appear.
The Timer Preview window will appear in the lower right corner of the screen seven seconds
before the timer is programmed to begin. When the timer activates, the Preview picture will
become the main picture.
NOTE:
• The On/Off time cannot be set to locked or guarded channels.
• In order for the On/Off timer to work, the clock must be set.
• After a power interruption, the Timer settings must be reset.
button
ENU
button
ENU

General Items

N S
------------- | -------------
37