Writing Cds On Dvd-Rom&Cd-R/Rw Drives; Before Writing Or Rewriting - Toshiba S300L User Manual

S300L
Writing CDs on DVD-ROM&CD-R/RW drives
Depending on the type of drive installed, you may be able to write CDs.
The DVD-ROM&CD-R/RW drive lets you write as well as read CD-ROMs.
Observe the precautions in this section to ensure the best performance for
writing CDs. For information on loading and unloading CDs refer to the
Media care
Please refer to the
of writable CD and DVD discs that can be supported by this computer.
Do not turn off the power to the optical disc drive while the computer is
accessing it as this may cause you to lose data.
To write data to CD-R/-RW media, use the TOSHIBA Disc Creator
feature that is installed on your computer.
When writing information to media using an optical drive, you should
always ensure that you connect the AC adaptor to a live power socket.
It is possible that, if data is written while powered by the battery pack, the
write process may sometimes fail due to low battery power - in these
instances data loss may occur.

Before writing or rewriting

Based on TOSHIBA's limited compatibility testing, we suggest the
following manufacturers of CD-R, CD-RW media, however, it must be
noted that disc quality can affect write or rewrite success rates. Please
also be aware that in no event does TOSHIBA guarantee the operation,
quality or performance of any disc.
CD-R:
TAIYO YUDEN CO., Ltd.
MITSUBISHI KAGAKU MEDIA CO., LTD.
Ricoh Co., Ltd.
Hitachi Maxell,Ltd.
CD-RW: (Multi-Speed and High-Speed)
MITSUBISHI KAGAKU MEDIA CO., LTD.
Ricoh Co., Ltd.
CD-RW: (Ultra-Speed)
MITSUBISHI KAGAKU MEDIA CO., LTD.
If the disc is poor in quality, or is dirty or damaged, writing or rewriting
errors may be noted - ensure that you check all discs for dirt or damage
before you use them.
The actual number of rewrites to CD-RW media will be affected by the
quality of the disc itself and the way in which it is used.
Data written to a CD-R disc cannot be deleted either in whole or in part.
4-10
section.
Writable discs, Chapter 2 for details about the types
User's Manual