Remote Programming - JVC AV 27D502 User Manual

Remote Programming

Setting the CATV, VCR and DVD Codes
You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond to any
of the codes listed below or to the code search function, use the remote control supplied by the
manufacturer.
Cable Box or Satellite codes
The remote control is programmed with CATV and/or Satellite codes for power on, power off,
channel up, channel down, and 10 key operation.
1) Find the CATV/Satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to "CATV".
3) Press and hold down the D
4) With the D
ISPLAY
5) Release the D
ISPLAY
6) Confirm the operation of the Cable Box/Satellite receiver.
• If your CATV or Satellite box does not respond to the first code, try the others listed. If it does not
respond to any code, try the Search Codes Function, on page 50.
18
button.
ISPLAY
button held down, enter the first code number listed using the 10 key pad.
button.