Connecting To A Dvd Player - JVC AV 27D502 User Manual

Connections

Connecting to a DVD player

Illustration of AV-32D502
1) Connect Green cable out from DVDplayer "Y"Component Output, in to T V" Y " Component Input.
2) Connect Blue cable out from DVDplayer "P
3) Connect Red cable out from DVDPlayer "P
4) Connect White Audio cable out from DVDLeft Audio Output, in to TV Left Audio Input 2.
5) Connect Red Audio cable out from DVDRight Audio Output, in to T V Right Audio Input 2.
• Green, blue and red are the most common colors for DVD cables. Some models may vary colors,
please consult the user's manual for your DVDPlayer for more information.
• Be careful not to confuse the red DVDcable with the red audio cable. It is best to complete one set
of connections (DVDor Audio Output) before starting the other to avoid accidentally switching the
c a b l e s .
• See page 20 for instructions on programming your remote control to operate the basic functions of
your DVD p l a y e r.
• If you use Input 2 (Component-In) for the DVD connection, you must set the
V2 COMPONENT-IN on the initial Setup Menu to "YES" for proper display of the DVD signal.
• N OT E : Progressive DVDPlayers (players with an output scan of 31.5 KHz) will not work properly
with this television.
14
"Component Output, in to T V" P
B
"Component Output, in to T V" P
R
"Component Input.
B
" Component Input.
R