Whirlpool AIR CONDITIONER Use & Care Manual page 10

Air conditioner
Hide thumbs Also See for AIR CONDITIONER:
Table of Contents

Advertisement

To operate air conditioner with remote control
NOTE: Two AA batteries (not included) power the remote control.
Replace batteries after 6 months of use, or when the remote
control starts to lose power.
To turn the air conditioner on or off:
Press POWER.
To select the mode:
Press AUTO COOL, COOL, FAN ONLY, or POWER SAVER.
Auto Cool—fan speed is adjusted automatically.
Cool, Fan Only or Power Saver—you can adjust the fan
speed.
10
To select the fan speed (in Cool, Fan Only or Power Saver
mode only):
Press TURBO, HIGH or LOW.
To raise the temperature:
Press the plus button. Room indicator light on air conditioner will
turn off and Set indicator light on air conditioner will turn on.
Display on air conditioner shows the Temperature control setting.
Each time you press or hold the plus button, the temperature will
increase 1º until it reaches 86°F (30ºC).
NOTE: After 3 seconds, Set indicator light on air conditioner will
turn off and Room indicator light on air conditioner will turn on.
Display on air conditioner will show the current room
temperature.
To lower the temperature:
Press the minus button. Room indicator light on air conditioner
will turn off and Set indicator light on air conditioner will turn on.
Display on air conditioner shows the Temperature control setting.
Each time you press or hold the minus button, the temperature
will decrease 1º until it reaches 64°F (18ºC).
NOTE: After 3 seconds, Set indicator light on air conditioner will
turn off and Room indicator light on air conditioner will turn on.
Display on air conditioner will show the current room
temperature.
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns off (the air conditioner must be On):
1. Press TIMER. Timer indicator light on air conditioner will
flash. Hour indicator light will turn on and display will show
remaining hours before air conditioner will turn off.
2. Press the plus or minus button to change delay time (1 to
24 hours).
3. Press TIMER again or wait 10 seconds. Timer indicator light
on air conditioner will remain on. Hour indicator light on air
conditioner will turn off and Room indicator light on air
conditioner will turn on. Display on air conditioner will show
the current room temperature.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents