JVC AV 27260 User Manual page 12

Connections
Cable and VCR Connections - Continued
Diagram #2
AUDIO VIDEO S VIDEO
R L MONO OVER INPUT
1
INPUT
4
COMPONENT
VIDEO IN
75
(VHF / UHF)
R L
AUDIO OUT
AV COMPULINK EX
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.
2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of
the VCR.
3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the TV.
4) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video Input
jack, OR connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video input.
5) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left Audio
Input Jack.
6) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
Audio Input jack.
• Please see page 44 for information on using the PIP feature with a Cable Box.
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV's
Left Audio Input.
• Please consult your VCR's owner's manual for more information on its operation.
12
WALL
CABLE or ANTENNA
OUT
OR
VCR
IN
OR