Connecting The Network; Sim Card - FLY V100 User Manual

Table of Contents

Advertisement

Note: If the phone has been overused when the battery is
low it may take a while for the charging prompt to be
displayed after charging has begun.
Charging is complete when the battery indicator in the system
icons area is full. If the battery is charged when the phone is powered
off, a Charge Complete screen will be displayed. It is normal for your
battery, phone and charger to become warm during charging.
When the charging is completed, disconnect your charger from the
power socket as well as your phone.
Note: You should charge your battery in a well-ventilated
environment with an ambient temperature between -10℃~
+55℃. Only use a manufacturer approved charger. Using
other chargers may be dangerous and it also violates the
warranty terms stipulated by the manufacturer.
When your phone turns off automatically or prompts "Battery Low",
the battery should be charged promptly. If the battery is charged when
it doesn't use up, the charging time will be shortened automatically.
2.6

Connecting the Network

2.6.1 SIM Card

You must insert a valid SIM (Subscriber Identity Module) card
before you can use the mobile phone. The SIM card is provided by
your network service operator.
All information needed to establish a network connection is stored
on the SIM card. The call numbers that you have chosen to save into
22

Advertisement

Table of Contents
loading

Table of Contents