Table of Contents
Advertisement
Mechanical disassemblies
5
Power supply ass'y removal.
1. Remove the screw-A(M3x8) and remove the Lamp connector.
2. Remove the screw-B(M2.5x6) ,remove the Ballast trigger hokder and shield plate.
3. Remove the 2 screws-C(T3x8), remove the screw-D(T3x8) and remove the Power Supply ass'y.
C
C
Ballast trigger holder
Power supply ass'y
A
B
Shield plate
Lamp connector
D
- 20 -
Advertisement
Table of Contents
