D3-4-2-1-7c*_A1_En Precautions Regarding Use Pioneer may not be held liable for the loss of any data or any other direct or indirect damage suffered as the • result of the use or breakdown of this product. It is strongly recommended to regularly back up all critical data.
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible. IMPORTANT NOTICE RECORD THE MODEL NUMBER AND SERIAL NUMBERS OF THIS EQUIPMENT BELOW. THE NUMBERS ARE ON THE BOTTOM. DVR-XD11T MODEL NO. SERIAL NO. KEEP THESE NUMBERS FOR FUTURE USE. D1-4-2-6-2*_A1_En...
(including warranty conditions) or any other information. In case the necessary information is not available, please contact the Pioneer’s subsidiaries (regional service headquarters) listed below: PLEASE DO NOT SHIP YOUR PRODUCT TO THE COMPANIES at the addresses listed below for repair without advance contact, for these companies are not repair locations.
Let the drive stand for one to two hours in the new location before turning it ON. Servicing – Opening or removing the cover exposes you to possible electrical shock or other danger. Contact a Pioneer authorized service representative for repairing this drive (refer to the enclosed Service & Support Card).
Damage Requiring Service – Unplug the unit and refer servicing to qualified service personnel in the following situations: • When the power cord, plug, or chassis is damaged. • If liquid has been spilled, or objects have fallen into the video product. •...
Interface Front/Top view Power/Busy Indicator Operation status is indicated as follows: During Power ON: Lights dimly During reading/writing: Lights During disc cover open: Lights OPEN Button Press to open the disc cover. Disc Cover Press the OPEN button to open the disc cover then place a CD or DVD disc onto the tray with the label facing up.
Connection This is a hot-plug unit. Connect the unit to the supplied USB cable. Confirm that your computer (PC) has two available USB ports. With your Windows® operating system running, use the supplied USB cable to connect this unit to the PC. Caution •...
Operations The unit writes to DVD-R/-RW media when the supplied software application is installed on your PC. Writing fails if the PC or operating system does not support the software. Begin writing to DVD-R/-RW Connect the necessary USB cable. Turn on the PC. Press the OPEN button, and gently lift the disc cover by hand.