Adding A Powerline Adapter; Changing The Shared Password Of Your Powerline Network - Hama Powerline LAN Set Operating Instruction

Entering the password for the Powerline adapters:
Once you have entered the Powerline adapter password,
you can also protect your data traffi c with a network
password later!
Now choose the adapter you wish from the main menu by
selecting it with the mouse and clicking -> Enter Device
Password.
In this window, enter the adapter password you previ-
ously made note of in the "Device Password" fi eld , then
click -> OK.
For all further adapters, please proceed in the same way.

9. Adding a Powerline Adapter:

If, later, you would like to expand your Powerline network
by one or more compatible Powerline adapters, you must
fi rst add these in the Hama Powerline Confi guration
Wizard.
To do this, click -> Add Device in the main menu of the
Confi guration Utility.
14
In the Device Name entry fi eld, enter the same password
as for the adapters that were connected previously.
You will fi nd this password by clicking on the Password
Settings tab in the utility. It is located in the Password of
your Powerline network entry fi eld. The default for this
is HomePlug.
In the Device Password entry fi eld, enter the password
found on the new adapter exactly as printed. You will
normally fi nd this password on the product label backside
of the Powerline adapter. Then click -> OK. You have now
added the new adapter.
If you would like to add further adapters, proceed in the
same way.
10. Changing the Shared Password of Your Powerline
Network
All HomePlug 1.0 Turbo compatible adapters are deli-
vered with the default password HomePlug as part of the
factory settings.
The password can only be changed under the following
conditions:
1. The Hama Powerline 85 Mbps Utility must be
installed on a Windows PC/laptop.
2. All required Powerline adapters must have been
either automatically recognized by the Confi guration
Utility or added manually by yourself.