Setting for ARS (A utomatic Response System)
To set for ARS (Automatic Response System)
1
Touch
[
]. Then the setting
screen appears.
4
Touch
[OK]
on the pop-up screen to
save the setting.
****
2
Touch [ARS]. Then the ARS setting
screen appears.
If the disengagement password for security is not set, the mode is not
●
switched to the remote control.
Note
Touch [
●
3
Set whether or not to use ARS and
touch [Run].
※ Touch [Cancel]. Then
the setting is canceled.
] to move to the previous screen.
73