Setting/Canceling Away
To set Away
1
Touch
[
]
Then the security
setting screen appears.
4
The
[Away]
function is now active.
"Away mode is
activated."
6
2
Touch
[
]
to set whether or not to
operate the Away mode.
When "Away" is set, the "Security" function is also activated.
●
When "Away" is set, "Away Mode" operates automatically.(see page 24)
●
Note
The control is also possible through the Web browser on your PC. The control
●
works the same.(Optional function)
Consult with the control office staff for more information.
After the Away setting is finished, be sure to go out from the house within the delay
●
time. When you return and open the door, if you do not cancel the setting within the
delay time, the corresponding alarm is to be sounded.
※ When you are away from the house, set this function. It works only
when the door is closed.
(This setting is available only when the detector operates normally.)
3
Enter the disengagement
password and touch [OK].
※ If the disengagement
password has not been set,
the password touch key pad does not appear.
(see page 70)