Configuring Macintosh Networking Software - Farallon SkyLINE 11Mb User Manual

C M
ONFIGURING ACINTOSH NETWORKING SOFTWARE
After you have configured the Wireless Control panel, you will need to
configure the AppleTalk and TCP/IP Control panels of your Macintosh.
1. Open the Wireless Control Panel. The Windows menu allows
immediate access to the Configuration, Information and
Statistics panels as well as your computer's AppleTalk, File
Sharing and TCP/IP Control Panels.
2. Open the AppleTalk Control Panel and select Farallon Wireless
from the Connect via pop-up menu. When you are finished, close
the Control Panel and save your settings.
3. Open the TCP/IP Control Panel from the Windows menu and
select Farallon Wireless from the Connect via pop-up menu.
Make sure the rest of your TCP/IP panel is configured correctly for
your wireless network.
4. Close the TCP/IP panel, saving your changes.
Installation 13