Farallon SkyLINE 11Mb User Manual page 10

6 Chapter 2
H
ARDWARE INSTALLATION
Consult your computer's manual for instructions on installing a card in
a PCI slot before you begin.
1. Power down and unplug your computer.
2. Locate an available PCI slot and remove any access cover,
3. Ground yourself and take your SkyLINE PCI Card from its antistatic
4. Align the card with the PCI slot and press firmly until the
5. Screw the SkyLINE PCI Card card firmly into the PCI slot using the
6. Insert a SkyLINE PC Card into the PCI card slot.
7. Reassemble your computer according to the instructions in its manual.
8. After the SkyLINE PCI Card is installed with a SkyLINE PC Card
retainer clamp or screws. Keep retainer clamps or screws for
securing the SkyLINE PCI Card in place.
bag, handling the card by its edges to avoid touching the
components.
connector is fully seated in the slot, with no gold pins showing.
retainer clamps or screws.
inserted in it, you can install the necessary driver and configure
your card for your wireless network. See the next page for
Macintosh software installation instructions.