Daily Operations - JVC LCT2505-001A-H Instructions Manual

Daily Operations

Turning on the main power
| : Main power on
‡: Main power off
On the bottom of the rear panel
Turning on the monitor
• To turn off the monitor,
press POWER OFF.
On the main unit:
Each time you press the button, the power turns on
and off.
Selecting an
input
On the main unit:
Each time you press the button, the input
changes.
Adjusting the volume
On the main unit:
To turn off the volume immediately:
• Pressing the button again resumes the
previous volume level.
• Muting can also be activated on the main
menu (see "AUDIO SETTING" on page 13).
On the top of
the rear panel
Remote
control only
• When the Control Lock is set to "ON" (see page 16), you cannot use the buttons on the main
unit.
• When the Security Lock is set to "ON" (see page 17), a password entry screen of the
set-up menu appears at turning on the power. Enter the correct password before starting
operations.
Changing the aspect ratio
Each time you press the button, the aspect ratio changes as follows:
REGULAR
Displays at conventional 4:3 aspect ratio.
Remote sensor
FULL
Enlarges the picture of 4:3 aspect ratio horizontally.
• For the picture of 16:9 aspect ratio, the aspect ratio is not changed.
ZOOM
Enlarges the picture of 4:3 aspect ratio vertically and horizontally at the same
ratio.
PANORAMIC
Enlarges the picture of 4:3 aspect ratio horizontally to the extent that the
picture does not look abnormal.
REAL DOT
Displays the original picture input at the center without zooming.
This item is not available when UXGA (1600x1200) signal is input.
NOTE
• For some signals, the aspect ratio cannot be changed or some modes cannot be selected.
• While the Multi Display is in use (see page 14), the aspect ratio is fixed to "FULL."
• The aspect ratio can also be changed on the main menu (see "SIZE SETTING" on page 13).
10