Samsung SNV-6012M User Manual page 16

installation & connection
adjusting the monitoring direction for the camera
` adjusting the monitoring direction
You can adjust the camera direction only when the camera is fixed on the ceiling.
Then, turning the camera to the left or right is referred to as "Panning", while tilting the
angle is "Tilting". For panning, the panning limit is 10° for the clockwise, and 10° for the
counterclockwise, a total of 20° enabled; further rotation is stopped by the stopper.
- Adjust the panning angle so that the camera settles in the right horizontal position.
You can adjust the panning up to 10° in each one direction, and 10° in the other
direction, a total of 20°.
- Adjust the tilting angle so that the camera settles in the right vertical position. You can
adjust the tilting between 0° and 90°.
` methods of adjustment
1. Loosen the screws on either ends of the lens cover by turning them counter
clockwise.
y The case of wall installation
① After mounting the camera on the wall, adjust the panning angle so that the camera
faces a desired direction when tilting.
② Then, adjust the tilting angle so that the camera faces the monitoring direction.
y The case of ceiling installation
① After mounting the camera on the ceiling, adjust the panning angle according to
the monitoring direction. You should adjust the panning angle lest that the video be
displayed upside down on the monitor.
② Then, adjust the tilting angle so that the camera faces the monitoring direction.
2. When done, turn the screw clockwise to fix the tilted angle of the lens.
For smoother Rotate adjustment, set the Tilt position between 60° ~ 80°.
`
J
16_ installation & connection
Lens Cover