Honda 1994 Civic Owner's Manual page 45

Main Menu
3. Press and hold the SET/decel
button on the steering wheel
until the CRUISE CONTROL
light on the instrument panel
comes on. This shows the system
is now activated.
The set speed may vary slightly,
particularly on hills.
Table of Contents
Changing the Set Speed
You can increase the set cruising
speed in either of two ways:
Press and hold the RESUME/
accel button. The car will acceler-
ate slowly. When you reach the
desired cruising speed, release
the button.
Push on the accelerator pedal. Ac-
RESUME/
celerate to the desired cruising
accel
speed and press the SET/decel
SET/decel
button.
You can decrease the set cruising
speed in either of two ways:
Press and hold the SET/decel
button. The car will decelerate.
Release the button when you
reach the desired speed.
Steering Wheel Controls
Tap the brake or clutch pedal
lightly with your foot. The
CRUISE CONTROL light on the
instrument panel will go out.
When the car slows to the
desired speed, press the SET/
decel button. The car will then
maintain the desired speed.
Even with the cruise control turned
on, you can still use the accelerator
pedal to speed up for passing. After
completing the pass, take your foot
off the accelerator pedal. The car
will return to the set cruising speed.
Resting your foot on the brake or
clutch pedal will cause the cruise
control to cancel.
Instruments and Controls
CONTINUED