Advertisement
This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions.
This symbol is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electrical shock.
CAUTION: To reduce the risk of electrical shock do not remove the cover or back of this
CAUTION: To prevent electric shocks and risk of fire hazards, do not use other than
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested.
Ensure that all accessories are removed from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose.
damaged or defective please contact your distributor or SecurityTronix at 1-610-429-1511 for
assistance.
3. WIRING CONNECTIONS
a. VGA IN – Using a standard VGA cable connect the ST-VGA/RCA to the PC or
laptop's VGA port.
b. Video Output can be achieved in three ways:
VGA OUT – Using a standard VGA cable connect the ST-VGA/RCA to monitor's
VGA port.
RCA Video OUT – Using the supplied RCA video cable connect the ST-VGA/RCA
to a display device (e.g., DVR, monitor) using an RCA composite video port.
S-Video OUT – Using the supplied S-Video cable connect the ST-VGA/RCA to a
display device (e.g., DVR, monitor) using that device's S-Video port.
INSTALLATION AND OPERATION
unit. No user serviceable parts are inside.
specified power source.
If equipment appears to be
3
Advertisement
