Sharp JH-1600E Service Manual page 16

List of Parameters for Operating Condition
Function explanation:
1. Utility over voltage (Vac): Setting utility over voltage trigger value.
2. Utility under voltage (Vac): Setting utility under voltage trigger value.
3. Voltage abnormal trip time (sec): Setting trip time when over and under voltage
protection is triggered.
4. Utility over frequency (Hz): Setting utility over frequency trigger value.
5. Utility under frequency (Hz): Setting utility under frequency trigger value.
6. Freq. abnormal trip time (sec): Setting trip time when over and under frequency
protection is triggered.
7. Recover timer: Setting solar power conditioner recovery time when error occurrence.
8. RJ-45 ID: Setting RJ-45 ID number.
9. Operation frequency: Setting utility frequency.
Table2. Setting value and parameter (The shadow value is default setting.)
Item
1 Utility over voltage (Vac)
2 Utility under voltage (Vac)
3 Voltage abnormal trip time (sec)
4 Utility over frequency (Hz)
5 Utility under frequency (Hz)
6 Freq. abnormal trip time (sec)
7
8
9
Function
Recover timer
RJ-45 ID
Operation frequency
Parameters
250 255
205 210
1 1.4
52 53
46 47
1 1.4
10 60
5 6
50 60
15
260
215
1.8
54
48
1.8
150 300
...... 31