Wideye FX 250 User Manual page 28

5.3.3 Primary Handset Operations
Making a Voice Call
Before making a voice call, please make sure that:
-The Primary Handset is connected to the BDU (
-The Primary Handset is NOT radio silent (
-The BDU has successfully registered with the network and ready for CS domain
(voice) services (
You can use the following two options for making a call:
• Manual Dial:
1. Using the alphanumeric keypad, dial 00 <country code> <phone number>.
2. Press
• Using Contacts or Call Log list from the Primary Handset:
- Enter the Contacts list of the Primary Handset; scroll to the desired number
and press
- Enter the Log list of the Primary Handset; scroll to the desired number and
press
Note:
For voice calls and SMS, you may also use '+' by pressing and holding the
instead of "00" at the beginning of dialled number string as an alternative ('+' <country
code> <phone number>).
To End a Call
1. Press
Receiving a call
When there is an incoming call, the Primary Handset will,
• Ring.
• The calling party's number will be displayed on the screen.
If the number is stored in the contacts, the corresponding name of contact will
be displayed.
To answer an incoming call, press the
26
FX 250 / FX 500 User Manual
status indicator should be on)
key.
key, or
key.
.
key.
status indicator should be on)
status indicator should be off)
key