Advertisement
Capturx Pen Manager 3.4
The Digital Pen and Docking Station
The pen looks and feels just like an ordinary ballpoint pen and you use it in the same way.
There are no keys to press. You simply activate the pen by removing the cap and deactivate
it by replacing the cap.
The docking station is used to dock your pen and to connect your pen to a PC or laptop via
the USB port so you can upload data. The docking station consists of the base, insert, and
the USB connector you use to connect the docking station to your computer.
To upload the ink using the pen and docking station:
1. You may need to place the ink cartridge in the pen. To place the cartridge in the pen,
take one of the ink cartridges and gently slide it into the hole at the tip until it is
completely seated and does not fall out. It's normal for the cartridge to have some
movement.
2. Attach the docking station to a PC or laptop via the USB port.
3. Fully insert the pen in the docking station.
4. The gold connection points on the pen and docking station need to be aligned and
the pen needs to be firmly placed in the docking station.
5. After you connect the USB port to your computer and dock your pen, you will initially
need to keep the pen in the docking station for four hours for it to fully charge.
Note: The pen needs to be charged before you can use it to capture data. To prevent your
battery from running low, do not leave the cap off the pen for extended periods of time.
Keep the pen cap in a safe place.
http://www.adapx.com/support/capturx-pen-manager-digital-pen
3
Advertisement
