Raymarine T303 Installation And Operation Instructoins page 36

Menu item / Description Settings / Operation
Enable / Disable High This option controls the amount of power used to
Motor Torque hold the camera steady when in use. The enabled
setting will consume more power, but help ensure
that the camera is held in place in rough seas.
The High Motor Torque mode may be useful for
power boats that operate at higher speeds and
experience high impact environments, and can
accept higher power consumption.
Note: If the camera moves due to shock or
vibration, then the Position indicator or Home
setting may need realigning (reset the camera
to realign).
Enable / Disable When this option is enabled the camera image is
Rearview Mode reversed and you will see a mirror image on the
display.
Enable / Disable When this option is enabled horizontal and vertical
Stabilization stabilization is turned on. Only applies to T470SC
and T473SC.
Set Stow Position This option sets the current position as the Stow
position. The camera moves to the stow position
whenever it is turned off or put into Standby mode.
Name Camera Use this option to name the camera.
This options enables you to set the scan width and
Surveillance mode
speed when in surveillance mode.
Exit Exit to main menu.
High power / High torque power use
Camera State Camera setting
Standby • High Power Mode
ON
• High Torque Mode
ON
• High Power Mode
Standby
OFF
• High Torque Mode
ON
Standby • High Power Mode
ON
• High Torque Mode
OFF
Awake • High Power Mode
OFF
• High Torque Mode
OFF
Awake • High Power Mode
ON or OFF
• High Torque Mode
ON
Awake • High Power Mode
ON or OFF
• High Torque Mode
OFF
36
Single
Dual payload payload
22 W 17.4 W
8 W 7.4 W
13 W 13 W
8 W 7.4 W
30 W 19.4 W
20 W 16.5 W
Surveillance mode menu
Menu item / Description Settings / Operation
Scan Width This setting determines the distance that the
camera pans left and right when in surveillance
mode. Select from:
• Narrow — The camera will scan approximately
• Medium — The camera will scan approximately
• Wide The camera will scan approximately 80º
Scan Speed This option determines the speed at which the
camera pans left and right when in surveillance
mode. Select between:
• Slow
• Medium
• Fast
Exit
About / Help menu
Menu item / Description Settings / Operation
Video Icon Help Screens This option displays an explanation of the purpose
of each of the screen icons. Use the direction
controls to cycle through the pages.
Product Information This option displays information about the camera:
• Name,
• Serial number,
• MAC address, and
• Software information.
This option displays Raymarine contact details.
Contact Raymarine
Restore Factory Use this option to restore the camera settings to
Defaults their factory default value.
Exit
20º left and right of the center (40º total).
40º left and right of the center (80º total). Or,
left and right of the center (160º total).
T-Series