Toshiba A210 Series User Manual page 134

A210 Series
Problem
Some CD/DVDs run
correctly, but others do
not
Cannot write correctly
9-8
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Check the CD/DVD's documentation.
Check the type of DVD/CD you are using. The
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROMXA
Mode 2 (Form1, Form2),
Enhanced CD (CD-EXTRA),
CD-G (Audio CD only)
Check the region code on the DVD. It must
match that on the CD-RW/DVD-ROM drive.
Region codes are listed in the Optical disc
section in Chapter 2,
If you have trouble writing, make sure you are
observing the following precautions:
Use only media recommended by
TOSHIBA
Do not use the mouse or keyboard
during writing.
Use only the software supplied with the
computer for recording.
Do not run or start other software during
writing.
Do not jar the computer during writing.
Do not connect/disconnect external
devices or install/remove internal cards
during writing.
If problems persist, contact your dealer.
The Grand Tour.
User's Manual