Advertisement
BEATER & CHOPPER ASSEMBLY
1. Align the notches on the Base Plate with the
groves on the inside of the Mixing Container. Slide
the Base Plate into the Mixing Container so that
is sits flat in the bottom of the Mixing Container
(Figure E).
2. Place the Beater or Chopper Attachment onto
the post of the Base Plate in the bottom of the
Mixing Container (Figure F).
CAUTION!
Handle the 3 Blade Chopper
Attachment by the plastic portion only. Blades
are very sahrp!
3. Align the Attachment with the post on the
Mixing Lid (Figure F).
4. Place the assembled Mixing Lid onto the
Mixing Canister.
5. Align the grooves in the Mixing Handle with
the splines on the Mixing Lid. Push the Mixing
Handle firmly down (Figure G).
6. The Beater (Figure H) or the Chopper (Figure
H1) is now ready for use.
WARNING
SHARP BLADES!
Protective/cut-resistant
Kevlar Gloves are
recommended whenever
handling
the 3 Blade Attachment!
Figure H1
Figure E
Base Plate
Notches
Mixing Container
Figure F
Post for Beater or
3 Blade Chopper
Attachments
Underside of
Mixing Lid
Beater
Attachment
Mixing Container
Mixing Handle
Figure H
Figure G
Splines
Mixing Lid
-6-
It is recommended that the Mixer be thoroughly
clean prior to use! Refer to Cleaning Instructions
in this booklet.
1. Fill the Mixing Container with the desired food to
be mixed. Do not overfill the Mixing Container (6 cup
(1.42 L) capacity) (Figure I).
2. Place the Mixing Lid Assembly (with the
attachment of choice) onto the Mixing Container.
Grooves
3. Turn the Mixing Handle. The Attachments will
turn and mix the contents of the Mixing Container
(Figure J).
4. When mixing is complete, remove the Mixing Lid
Assembly.
CAUTION! Handle the 3 Blade Chopper Attachment
by the plastic portion only. Blades are very sahrp!
USING THE MIXER
NOTE:
When filling the Mixing Container to the maximum capacity,
the weight of the filler might be too much for the Handle to bear. It is
always best to hold the Handle and place one hand under the Mixing
Container for support when carrying or pouring.
-7-
Figure I
Mixing
Container
Figure J
Mixing Handle
Mixing Lid
Advertisement
