Description - Qls 21F1 Service Manual

TCL-THOMSON Electronics R&D Center (Shen'Zhen Lab)
EEPROM INIT
BRI CURVE
CONCURVE
COL CURVE
VOL CURVE
AV STANDB
DEFALT
LANGUAGE
DEFALT TUNE
MODE
AT ENABLE
VCHIP ENABLE

Description:

1). Set the shopping status
When trigger the "SHOP INIT" item form "0" to "1", the TV will be put on selling status.
The TV status after shopping status:
A. "FACTORY HOTKEY" had set to "OFF".
B. Picture set to "Standard" status. (Brightness=50, Contrast=50, Colour=50, White
tone =Normal.)
C. Sound set normal.(Volume=30,Balance=50.)
D.
2). Set the user picture and sound curve value
A. Brightness curve:
OSD menu Default Value
BRI0 0
BRI50 32
BRI100 63
B. C ontrast curve:
OSD menu Default Value
CON0 0
CON50 32
CON100 63
Chassis Name
Issued on
Updated on
0 EEPROM initial
>>>>>> Brightness curve
>>>>>> Contrast curve
>>>>>> Color curve
>>>>>> Volume curve
AV no signal within 10
0 minutes automatic
SET DEFALT
1
LANGUAGE
1 SET DEFALT TUNE
1
1
Set the minimal brightness when user Brightness=0
Set the brightness when user Brightness=50
Set the maximal brightness when user Brightness=0
Set the minimal contrast when user C ontrast=0
Set the contrast when user C ontrast=50
Set the maximal contrast when user C ontrast=0
NX56-LA
2008-05-19
2010-01-27
STB=Standby when power on
standby
MODE
AT MODE
ENABLE
VCHIP
ENABLE
Description
Description
Serial No.
Page
Version
LAST=Last power off status
0=>1=Active EEPROM initial
Adjust this value
Adjust this value
Adjust this value
Adjust this value
1 =Enable 0=Disable
1=Enlish 2 =Portuguese
3= Spanish
DEFALT TUNE MODE
0 = cable
1 = antenna
1 =Enable 0=Disable
1 =Enable 0=Disable
Remark
Set the value as
practical
requirement
Remark
Set the value as
practical
requirement
Page 11 of 15
2.2