Advertisement
For example to change the Low Battery 100mV setting:
Button pressed for > 5 seconds
Dash Dot Dot
Dot
Dot
Dot Dot
At this point the Low Battery 100mV setting has been changed to '100mV'. The module will now
continue with the next item in the menu, and continue to the end of the list. Once the end of the list is
reached, the receiver will automatically exit the programming mode signaled by two short beeps.
Beep Codes
Beep Code
- .
- . .
Note that * indicates the default value .
www.immersionrc.com
- second menu item –
-
- first available option -
- second available option -
Menu
Menu Choices
Low Batt Volts
1 – Auto (for 2S or 3S LiPo)*
2 – 6v
3 – 7v
4 – 8v
5 – 9v
6 –10v
7 – 11v
8 – 12v
Default: 6V for 2S, 9V for 3S
Low Batt 100mV
1 – 0.0v .... 10 – 0.9v
Default: 0.5v (for threshold of 9.5v)
(Ignored in Auto mode)
press button briefly to enter setting
current setting (auto)
0.0v press button briefly
100mV press button briefly
info@immersionrc.com
Advertisement
