Immersion Uno 5800 User Manual

hg
 Single receiver, compact size
 Standard 5.8GHz band frequencies:
5740MHz, 5760MHz, 5780MHz,
5800MHz, 5820MHz, 5840MHz,
5860MHz

Dual buffered AV outputs
 Single-cable connection to
ImmersionRC Ground Stations
 Bidirectional GroundStation<-
>receiver data link
 Can be powered from 6-13V
(< 9v, or 2s recommended)
 High bandwidth stereo-audio.
 Single button operation for channel
selection, with remote channel
selection from Ground Station
 Single high-quality SMA antenna
connector (Standard SMA, not RP-
SMA)
 FM Audio/Video Modulation
 High quality video (higher than most
'Chinese 5.8GHz systems)
 -90dB typical sensitivity
 50 ohm antenna impedance
 1Vpp Video output level
 3V pp Audio output Level
 Small, light weight, durable,
anodized aluminum casing

Weight: 169-grams
 Size : 80 x 90 x 23mm
www.immersionrc.com
Uno 5800 A/V Receiver
Groundstation Component Receiver
The Uno5800 is the first in a line of 'smart' receivers, designed for
single-cable, plug and play, integration with the ImmersionRC Ground
Station system.
Power, Audio, Video, and a bidirectional data link, are all passed
through a single Mini-Din connector, connected to the Ground Station.
Alternatively, traditional 3.5mm jacks, and DC power jacks, are
provided for compatibility with older systems.
The data link allows the Ground Station to know, at all times, the
received signal strength (RSSI), allowing it to warn the pilot of low-
signal conditions. This signal may also be used to help 'hone' a GPS-
tracked antenna mount, to ensure that the antenna is always optimally
positioned pointing at the plane.
This same data link allows the Ground Station to control various
aspects of the receiver, including the channel selection. For receivers
mounted directly on the antenna's RF output (where cable losses are
eliminated), which are not easy to access, this can be a real help
With > -90dB sensitivity per receiver the Uno 5800 is sensitive, very
sensitive. Paired with an appropriate antenna, it will give you many
miles/km of range. Add an antenna tracker, and a higher gain antenna,
and this range increases significantly.
It is engineered from an FPV-er's perspective and hence has features to
match. It'll warn you when the receiver battery runs low, with an
automatic, or user-settable low voltage threshold.
ImmersionRC – Real Virtuality
info@immersionrc.com