Trouble Shooting; Remote Control - Elation PRO HAZE DMX User Instructions

Pro Haze DMX™
If you experience low output, mechanical noise or no output
at all, unplug immediately. Check fluid level, the external
fuse, remote connection, and power from the wall. If all of
the above appears to be O.K., plug the unit in again. If hazer
does not function after 30 seconds, discontinue operation
or permanent damage to the unit may result. Please con-
tact Elation Customer Support for further instructions, the
unit may need to be returned for service. Always drain tank
before mailing or transporting this unit.
Elation Professional - www.elationlighting.com - Pro Haze DMX™ Instruction Manual Page 11
© ®
Operating Instructions cont. Pro Haze DMX™
If you experience low output, pump noise, or no output at all, discon-
nect immediately. Do not attempt to continue pushing the remote
button as this may damage unit. Check fluid level, the external fuse,
remote connection, and check power from wall. If all of the above
appear to be in good condition, and the unit fails to operate cor-
rectly, the unit will require service. Return the machine to an Elation
Authorized dealer or service center.
Pro Haze DMX™

Remote Control:

The haze machine comes with a full function remote control. The
remote control is connected to the rear of the unit. Be sure to connect
the remote to the proper jack. Do not try to force the remote con-
nection in to the jack. You could damage your remote. The remote
has three LED's that will indicate the different functions. See the next
page remote functions and descriptions.
Elation Professional - www.elationlighting.com - Pro Haze DMX™ Instruction Manual Page 12
© ®

Trouble Shooting

Remote Control