Basic Operations - JVC KD-SX939/SX930 Instruction Manual

BASIC OPERATIONS

1
3
1
/ I
ATT
2
CD-
CH
3
4
Adjust the sound as you want (see pages 14 – 16).
To drop the volume in a moment
Press briefly while listening to any source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press for more than 1 second.
CAUTION on Volume Setting
CDs produce very little noise compared with other sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged by the sudden increase in the output level.
Therefore, lower the volume before playing a CD and adjust it as required during playback.
4
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
BAND
TUNER C D
Adjust the volume.
2
Select the source.
To operate the tuner, see pages 5 – 9.
To operate the CD player, see pages 10 – 13.
To operate the CD changer, see pages 24 – 26.
Volume level appears.
Note:
When you use this unit for the
first time, set the built-in clock
correctly, see page 17.
Volume level indicator
(See page 18.)
CRUISE