Radio Basic Operations; Listening To The Radio - JVC KD-SX1000RJ Instructions Manual

RADIO BASIC OPERATIONS

Listening to the radio

When using this unit in an
area other than North or
South America:
You need to change the AM/
FM channel intervals. See
"Changing the
channel intervals" on page 33.
1
BAND
TUNER
F1 F2
(FM1) (FM2)
2
SSM
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching
1 Press TUNER/BAND repeatedly to select the band (FM or AM).
2 Press and hold ¢
Now you can manually change the frequency while "M" is flashing.
3 Press ¢ or 4
• If you hold down the button, the frequency keeps changing (in 200 kHz intervals for FM
and 10 kHz intervals for AM) until you release the button.
AM/FM
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
F3 AM
(FM3)
To search stations
of higher
frequencies.
To search stations
of lower
frequencies.
or 4
until "M" starts flashing on the display.
repeatedly until the frequency you want is reached.
2
Selected band appears.
Start searching a station.
When a station is received, searching stops.
1
5