Electrolux Ultracaptic Quick Start Manual page 5

Cleaning the pre-motor fine dust filter to protect the motor
Remove the Pre-motor lter from the
ne dust container.
replaced when required.
Cleaning fine dust container and cyclone cone
8
Open the ne dust container lid and
tap gently to empty dust when required.
please do not
attempt to
remove cyclone
cone.
Open brush roll cover by pushing the latches. This will
free the front wheels for cleaning.
Cleaning the AeroPro Silent Air Technology nozzle*
Cleaning the AeroPro motorized nozzle*
Always disconnect the nozzle before cleaning it !
Pull out the brush roll and remove entangled threads by
snipping them away with scissors. Use the hose handle
If the wheels are stuck, remove them carefully by using
a small screwdriver.
9
*Only applies to certain models