Roland A-49 Owner's Manual page 14

Driver Installation
5.
When a confirmation screen regarding user account control appears, click [Yes] or
[Continue] .
6.
When "The A-Series Keyboard Driver will be installed on your computer" appears,
click [Next] .
7.
Click [Next] again .
Windows 7/Windows Vista
If a dialog box regarding Windows security appears, click [Install].
Windows XP
If the "Software Install" dialog box appears, click [Continue] to proceed with the installation.
If you cannot proceed, click [OK] to cancel the installation. Change the settings as described
in "Driver Signing Options Setting (Windows XP)" (p. 46) and try installing again.
8.
When "Ready to install the driver . "
appears, connect the USB cable of the
A-49 to the computer .
* Turn down the volume on any peripheral
devices before connecting the USB cable.
* This unit is equipped with a protection
circuit. A brief interval (a few seconds)
after turning the unit on is required before
it will operate normally.
It may take several minutes for the driver to be installed.
Windows 7/Windows Vista
If other messages appear, follow the instructions on the screen. The driver will be installed
automatically.
Windows XP
"Found new hardware" will appear in the lower-right corner of the screen.
14
Windows
A-49
rear panel
Windows 7/Windows Vista
Windows XP