Radio Basic Operations; Listening To The Radio - JVC KD-S711R Instructions Manual

RADIO BASIC OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune into a particular station.
Searching a station automatically:
Auto search
1
Select the band (AM, FM1 – 3).
FM1
AM
Selected band appears.
Audio (see page 21) or volume level
indicator
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching
stops.
6
FM2 FM3
Press ¢
to search
stations of higher
frequencies.
Press 4
to search
stations of lower
frequencies.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1
Select the band (AM, FM1 – 3).
FM1
AM
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold ¢
"M"(manual) starts flashing on the
display.
Selected band appears.
FM2 FM3
or 4
until